Foam pressure pump

Short Description:

Place of Origin:China
Surface Handling:Screen Printing
Base Material:PET
Body Material:PET
Collar Material:PET


Product Detail

Product Tags

Quick Details

Place of Origin:China
Surface Handling:Screen Printing
Base Material:PET
Body Material:PET
Collar Material:PET

The bottom of the bottle should be well formed, without depression, bulge and center The appearance of the filled pet medical plastic bottle is free from shrinkage and deformation, flat bottle, side wall deformation, convex bottom and depression. The product has clean surface, no peculiar smell, dryness, no dust and oil stain, and no impurity inside.

Foam pressure pump (4)
Foam pressure pump (5)

The moisture content of the material must be fully dried before production. Generally, the drying temperature is 160 ℃ for the dried materials. If it is stored in the air for a long time, it will not absorb moisture. Therefore, once the raw materials are dried, they must be used immediately or directly by the continuous dryer, otherwise they must be kept in the incubator at 90 ~ 100 ℃ for standby, so as to avoid moisture absorption again after drying

 

High isolation packaging. High isolation packaging is the application of materials with excellent isolation to control gas and water vapor. Smell, light, etc. into the package to ensure the effectiveness of drugs. High isolation packaging has been widely used in Europe and Japan. However, China has introduced PVDC and other high isolation packaging since 1980s, but its growth is slow. Therefore, the growth of high isolation material packaging is a major trend of drug flexible packaging in China;

Foam pressure pump (6)
Foam pressure pump (8)

In fact, the safety of PET bottles is inseparable from the advantages of PET plastic bottles. The first is that PET plastic bottles are light in weight and durable in material.

The second is that PET plastic bottles are cheap in price. Compared with glass and ceramic packaging, the price of PET plastic bottles is much lower. Third, PET bottles have a high recycling rate, which is far higher than other plastic bottles, which is conducive to environmental safety.

bottle mouth (mm)
weight
(g)
capacity
 (ml)
diameter
(mm)
shoulder height
(mm)
bottle height
(mm)
42
65
500
81
123
143



Applicable to cosmetics, skin care products, shampoo, Hand Lotion, shower Gel, facial cleanser and other liquid emulsion bubble sub-bottling.







  • Previous:
  • Next:

  • Send your message to us:

    Write your message here and send it to us

    Related Products

    Send your message to us:

    Write your message here and send it to us